Pg. 5
Installation Guide
Preparation
Before installation, please read through all safety information provided in this document. If you have any
questions about operation and safe use of the battery system, please contact technical support.
Before Operation:
•
Work must be carried out by qualified personnel who have completed the required training and are
certified to undertake electrical work in their state.
•
Remove all metal items, such as jewelry, watch, pen etc. from body.
•
To ensure the safety of construction personnel and equipment, disconnect the battery pack from
the operating equipment during wiring.
•
Follow the connection port description and system connection diagram. Pay attention to the
terminal polarity of the battery module.
•
Ensure the tools insulation are in proper condition and to use them correctly.
•
Do NOT plug or unplug the battery when it is in operation. Necessary work should be conducted
after the power supply is disconnected.
•
Before its formal operation, ensure whether the power terminals are properly connected and
tightened. When it is necessary to take measurements, be careful to use the instruments and tools
to avoid short circuit and other accidents.
•
Do NOT disassemble the battery without the proper authorisation from manufacturer
Compatibilities
Do NOT connect different batches, different types, old and new batteries in one bank. To connect the
batteries into a bank (in series and/or in parallel), the batteries should meet the following conditions:
•
All batteries must be from the same brand and same model.
•
Have the same battery capacity (Ah).
•
Are of similar age, preferably manufactured from the same batch.