Guangzhou Yingfeng Lighting Equipment Co.,Ltd
www.yf-light.com
6
1. In the main interface touch the “set” button, come to the “setting”interface
2. The same to the up 4~7 step(can use both physical button and touch button), no more
words.
9、
Interface introduction
9.1.
Main interface
The 3 buttons at top right corner are for language switching and screen rotation.
The function of the 4 buttons on the bottom row please see the following info.
9.2.
Interface Settings
Options
Illustration
Running Mode
DMX
Slave State
：
Receiving DMX signal from controller
or Master.
Auto
Master State
：
Auto run
，
and sending DMX signal to
Slave.
Notice
：
If the bulb off,the light will not be on
automatically; if you need to observe the lighting
effects,please turn on the bulb light firstly,then
enter the automatic state.
DMX Address
1-512
Press “OK”button to enter edit state.at the same
time,choose the hundreds place,change address
code according to the“UP”and”DOWN”Button.
Click”OK”again to select tens to edit,and then
click”OK”again to select Units to edit.Click again
to exit.
Channel Model
16
The 17
th
to 20
th
channel is invalid
20
The 17
th
to 20
th
channel control function (see
channel table)
Pan reversal
off
