YewdaleDefiant
®
fitting instructions
Part no: 936
14
R20W Light Duty Crank Control:
N.B
.
This blind should be installed by a person competent in DIY. If in doubt
please consult a professional.
1
.
The standard universal metal brackets supplied with the blind may be top,
face or side-fixed.
2
.
Check that the blind fits correctly. The pin-end is sprung for easy fitting, but
the pin should be depressed once in place. The fabric should roll off the back
of the barrel, unless ordered reverse-roll.
3
.
Fix the control-end bracket using appropriate screws/plugs.
4
.
Locate the blind in the control-end bracket, and mark the position of the
pin-end bracket.
5
.
Remove blind and fix pin-end bracket using appropriate screws/plugs.
NB.
To operate correctly, the blind MUST be fixed level.
6
.
Insert the pin in the pin-end of blind into bracket. Press the blind against
the bracket to depress the sprung pin, and insert the lug on the control-end
into its bracket until it drops into place.
7.
Check that the blind operates correctly.
NB.
Large blinds are heavy and it is important that the correct fixings are used.
If unsure, seek expert advice.
Fitting Instructions
YewdaleDefiant
®
roller blinds (R20, Fascia, R20C, R20D, R20S, R20W)
