Call:
+44 (0)1268 570900
Fax:
+44 (0)1268 732509
Email:
Visit:
www.yewdale.co.uk
5
13
.
Ensure the relevant child safety device is used to comply with BS
EN13120:2009+A1:2014, BS EN16433:2014 and BS EN16434:2014 as
follows: *You will have been provided with either a chain tidy or easy
break chain connector (also see page 8 & 11)
Chain Tidy
The chain tidy will be attached to the chain
when the blind arrives. The chain tidy should
be at a maximum distance from the control
mechanism, keeping the chain taut (not
under excessive tension however as this
could negatively affect the longevity and
operation of the blind). Put the retaining
device on the wall, mark fixing holes with a
pencil, drill the holes and screw the device
to the wall with suitable fixings.
Easy Break Chain Connectors
Two easy break chain connectors are connected to the operating chain
200mm apart. This ensures that at least one of them will be in the vertical
position ensuring they perform as required. If excessive weight is applied
within the loop a connector will come apart. If a connector comes apart
and is undamaged then it will need to be re-connected by inserting the
last ball on the end of the chain into the hole in the connector and pushed
into place.
