background image


 

 

FOREWORD 

 

You’ve  just  joined  an  exclusive  but  rapidly 
growing club. 
 
For  our  part,  we  want  to  welcome  you  to  the 
group and thank you for buying a Yetter product. 
 
We  hope  your  new  Yetter  products  will  help  you 
achieve both goals-increase your productivity and 
increase your efficiency so that you may generate 
more profit. 
 
This  operator’s  manual  has  been  designed  into 
four 

major 

sections: 

Foreword, 

Safety 

Precautions,  Installation  Instructions  and  Parts 
Breakdown. 
 

 

This 

SAFETY  ALERT  SYMBOL 

indicates 

important  safety  messages  in  the  manual.  

When  you  see  this  symbol,  be  alert  to  the 

possibility  of 

PERSONAL  INJURY 

and 

carefully read the message that follows. 

 
The  word 

NOTE

  is  used  to  convey  information 

that  is  out  of  context  with  the  manual  text.    It 
contains 

special 

information 

such 

as 

specifications, 

techniques 

and 

reference 

information of a supplementary nature. 
 
The  word 

IMPORTANT 

is  used  in  the  text  when 

immediate damage will occur to the machine due 
to improper technique or operation.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Important  will  apply  to  the  same  information  as 
specified  by  note  only  of  an  immediate  and 
urgent nature. 
 
It  is  the  responsibility  of  the  user  to  read  the 
operator’s  manual  and  comply  with  the  safe  and 
correct  operating  procedure  and  to  lubricate  and 
maintain 

the 

product 

according 

to 

the 

maintenance schedule in the operator’s manual. 
 
The  user  is  responsible  for  inspecting  his 
machine  and  for  having  parts  repaired  or 
replaced  when  continued  use  of  the  product 
would  cause  damage  or  excessive  wear  to  the 
other parts. 
 
It  is  the  user’s  responsibility  to  deliver  his 
machine  to  the  Yetter  dealer  who  sold  him  the 
product  for  service  or  replacement  of  defective 
parts, which are covered by the warranty policy. 
 
If  you  are  unable  to  understand  or  follow  the 
instructions  provided  in  this  publication,  consult 
your local Yetter dealer or contact: 
 

YETTER MANUFACTURING CO. 

309/776-4111 
800/447-5777 

309/776-3222 (FAX) 

Website:  www.yetterco.com 

E-mail:  [email protected] 

 

WARRANTY 

 

Yetter Manufacturing warrants all products manufactured and sold by it against defects in material.  
This warranty being expressly limited to replacement at the factory of such parts or products as shall 
appear to be defective after inspection.  This warranty does not obligate the Company to bear cost 
of  labor  in  replacement  of  parts.    It  is  the  policy  of  the  Company  to  make  improvements  without 
incurring obligations to add them to any unit already sold.  No warranty is made or authorized to be 
made, other than herein set forth.  This warranty is in effect for one year after purchase. 
 
 

DEALER: ________________________________________ 

 

Yetter Manufacturing warrants its own products only and cannot be responsible for damages 
to equipment on which mounted. 

 

Содержание 2968-020B

















































Отзывы: