background image

5

.

6

.

CONGRATULATIONS ON

YOUR PURCHASE OF A 

NEW YETI. 

We are confident your new bicycle will 

exceed your expectations for value, 

performance, and ride quality. Each 

frameset and component has been custom 

specified and designed to enhance your 

riding experience. Whether you are a 

beginner cyclist, or a seasoned pro, your Yeti 

bicycle will provide endless hours of two-

wheeled fun. 

This model specific manual is designed to 

be used in conjunction with the general Yeti 

Owner’s Manual and the manuals supplied 

by the suspension manufacturers. If you did 

not receive the Yeti owner’s manual or the 

manual provided by the suspension 

manufacturer, download the materials off 

the Internet, or contact your local dealer.

Bicycling can be a hazardous activity 

even under the best of circumstances. 

Proper maintenance of your bicycle is your 

responsibility and when done properly helps 

reduce the risk of injury and damage to your 

bicycle. 

This manual outlines basic setup and 

maintenance recommendations of your new 

Yeti. Because it is impossible to anticipate 

every situation or condition that may occur 

during the assembly, setup, and 

maintenance of your bicycle, Yeti 

recommends that all service and repairs be 

performed by your local authorized Yeti 

Dealer. 

This manual contains many “Warnings” and 

“Cautions” concerning the consequences of 

failure to maintain or inspect your bicycle. 

The word “Warning” indicates a potentially 

hazardous situation in which , if not 

avoided, could result in serious injury or 

death. The word “Caution”  indicates a 

potentially hazardous situation in which, if 

not avoided may result in minor injuries or 

damage to your bicycle or a component of 

your bicycle. Be sure to read and 

understand all of the Warnings and 

Cautions listed in the manual. 

Warning:

 Make sure you review and understand the warnings, instructions, and content of this manual and accompanying 

manuals for your bicycle. 

Warning:

 Technological advances have made bicycles and bicycle components more complex and the pace of innovation 

is increasing. It is impossible for this manual or the accompanying manuals to provide all the information required to 

properly repair and/or maintain your bicycle. In order to help minimize the chances of an injury, it is critical for you to have 

work performed by an authorized Yeti retailer.

Содержание SB130/LR




















Отзывы: