18.
19.
Fit the housing from the rear shifter across the head tube and across the two cable guides on the underside
of the down tube. Next, route the cable around the dogbone and into the two cable guides on the drive side
seat stay and into the derailleur to finish.
Caution: the failure to properly route shifter housing can cause malfunction of the shift mechanism and
unexpected shifting of gears.
The rear brake line loops across the head tube and into the three cable stops on the down tube. Next, route
the brake line over the bottom bracket shell and across the non-drive chainstay. Ensure the line is finished
on the inside of the seatstay when attached to the caliper body. This will prevent the brake line from being
compromised if the bike or rider falls.
Cable setup
The 4X has full cable housing. By using full cable housing, we have eliminated break points
in the line of your shifter housing. This allows riders to experience better overall shifting
performance by reducing the entrance of unwanted elements such as sweat and sediment.
Use of full cable housing helps prevent corrosion from the elements and keeps the shifting
smoother for a longer period of time.
yeti tips
01. rear derailleur
02. rear brake
