ASSEMBLY
INSTALLING RIM TAPE
1.
Before applying tape make sure rim is free from any damage. If
damage is found contact your dealer.
2.
Clean inner surface of rim thoroughly using isopropyl alcohol to
remove any residue that would prevent the rim tape from
adhering properly.
3.
Ensure rim tape measures 30mm in width and is specifically
designed for bicycle rim use.
4.
Adhere rim tape to rim bed 100mm past valve stem hole.
Slowly apply rim tape in short sections along entire
circumference of rim bed until rim tape overlaps itself and
extends 100mm on the other side of the valve stem hole.
a.
As the rim tape is applied ensure light tension is kept on
the rim tape before it is pressed firmly into the rim bed.
5.
Cut rim tape and confirm that the rim tape is completely
adhered to rim bed around the entire surface of the wheel.
INSTALLING VALVE STEM
1.
Using a small sharp tool, cut the rim tape to allow valve stem to
fit through.
a.
Make sure you do not damage rim when cutting valve
stem hole in the rim tape.
2.
Assemble the valve stem according to the manufacturer's
specifications.
FITTING THE TIRES WITHOUT A TUBE
1.
Make sure that a tubeless ready tape and a tubeless valve are
used in installation.
2.
Be sure to use high quality tubeless sealant fluid when installing
a tubeless tire system. Follow the instructions of the chosen
sealant manufacturer.
3.
Install only “Tubeless Ready” tires as directed by tire
manufacturer.
4.
Tire bead must contact the rim evenly and securely around the
entire wheel circumference. Use plastic tire levers to properly
set tire bead.
5.
Once bead is set, pump the tires up to their maximum
approved pressure.
6.
Check the tire bead seat to ensure no air is escaping and that
tire pressure is holding firmly. Incorrect sealing of tire bead to
wheel rim may result in loss of air pressure and wheel failure. If
in doubt, contact your Yeti Cycles retailer for installation.
7.
When no air is escaping you may reduce the tire pressure to the
desired operating pressure. Be sure to stay within the PSI
recommendation of chose tire manufacturer.
Yeti Cycles offers no functional guarantee for the tubeless system since
we are unable to exert any influence on the tires, sealant used and
installation process.
Yeti Cycles 35th Anniversary wheels are tubeless ready and compatible.
In order for best results, follow the proceeding installation process. If in
doubt, contact your local Yeti Cycles retailer for professional tubeless
tire installation services.
If chosen, follow these steps for tubeless tire use and installation:
8.
Содержание 35TH ANNIVERSARY
Страница 1: ...RIM USER MANUAL 35TH ANNIVERSARY PROJECT...
