Yeswelder CT2050, Руководство оператора

Страница: 26 / 56

Process Parameter Description 220V 110V Default
DC TIG
PRE GAS Pre-flow 0.1~15s 0.1~15s 0.3s
Istart Initial Current 5~160A 5~80A 15A
SLOPE UP UpSlope Time 0~10s 0~10s 0s
I1 Peak Current 5-200A 5~160A 50A
SLOPPE DOWN Downslope Time 0~15s 0~15s 0s
Istop Crater Current 5~200A 5~100A 15A
POST GAS Post-flow 0.1~15s 0.1~15s 2s
Pulse TIG Welding
Fig 15 DC Pulse TIG Current Change Waveform
In pulse TIG mode, all DC TIG parameters except current (I3), could check the description above DC TIG Welding. There are 4 dif-
ferent adjustable parameters in this process. Describe them as below.
Ÿ Peak Current (Ip): It should be adjusted according to users' technical requirements.
Ÿ Background Current (Ib): It should be adjusted according to users' technical requirements.
Ÿ Pulsed Frequency (1/T): T=Tp+Tb. It should be adjusted according to users' technical requirements.
Ÿ Pulse Duration Ratio (Pulse Width (100%*Tp/T): The percentage peak current time holding in pulse period. It should be ad-
justed according to users' technical requirements.
Upslope
Welding Current
I 1
Initial Preset Downslope
Pilot arc
O
tp
tb
T
I b
I 5
I p
t
I
DC TIG Parameters
DC Pulse TIG
23
The actual parameter can be flexibly selected according to actual workpiece thickness and technology.
Process Parameter Description 220V 110V Default
DC Pulse TIG
PRE GAS Pre-flow 0.1~15s 0.1~15s 0.3s
Istart Initial Current 5~160A 5~80A 15A
SLOPE UP UpSlope Time 0~10s 0~10s 0s
I1 Peak Current 5-200A 5~160A 50A
I2 Background Current I1*10%-I1 A I1*10%-I1 A 50A
PULSE(Hz) Pulse Frequency 0.2-200Hz 0.2-200Hz 0.5Hz
DUTY CYCLE (I1:I2) Pulse Width 10%-90% 10%-90%
SLOPPE DOWN Downslope Time 0-15s 0-15s 0s
Istop Crater Current 5-200A 5-100A 15A
POST GAS Post-flow 0.1-15s 0.1-15s 2s