7
6
Digital Satellite Receiver
Digital Satellite Receiver
USER’S MANUAL
USER’S MANUAL
2. Unpacking
Unpack the receiver and check to make sure that all of the following items are
included in the packaging.
1 x Remote Control Unit (RCU)
1 x User’s Guide
1 x Digital Satellite Receiver
3. General Operation of STB
Throughout this manual you will notice that the everyday operation of your STB is
based on a series of user friendly on screen display and menus. These menus will
help you get the most from your STB, guiding you through installation, channel
organizing, viewing and many other functions.
All functions can be carried out using the buttons on the RCU, and some of the
functions can also be carried out using the buttons on the front panel.
Please be aware that new software may change the functionality of the receiver.
Should you experience any difficulties with the operation of your unit, please consult
the relevant section of this manual, including the Problem Shooting, or alternatively
call your dealer or a customer service adviser.
NOTE:
Please be aware that new software may change the functionality of the receiver.
The
photo and the function explanation involved in this specification is for reference
only. If there is any mistake, please refer to the entity.
OVERVIEW OF THE EQUIPMENT
1. Front Panel
STAND BY :
Press to switch between opreation and standby modes
VOL :
When watching a channel, adjust the volume or move to the left or
right item in the menu.
CH :
When watching, change to the previous or next channel, or move to
the next higher or lower item in the menu.
OK :
Execute the selected item in the menu
Front Panel Display
: UP LOAD PROCEDURE
: SYSTEM WAITING
: DOWN LOAD PROCEDURE
: INVALID DOWNLOAD INFO
: ERROR IN DATA TRANSMITTING
: SYSTEM BOOTING