YES Watch Cozmo series, Инструкция по эксплуатации

Страница: 10 / 26

How to Adjust the Bracelet
Place the bracelet in the link adjustment tool as shown. Make sure the screw-pin points in the same direction as
the arrow on the back of the link. Carefully align screw pin with link pin, guide the bracelet into place and then
slowly start turning the wheel inwards. The link pin will glide out. Remove as many links as desired to fit your
wrist. Re-attach the links by reversing the process. Spare screw-pins are in the back of tool.
How to exchange the bracelet.
Release the bracelet by inserting the fork-end of the dual pick into the slot on the back of the bracelet attachment
link, leveraging it carefully, but firmly, outwards to release the spring loaded pin. You may want to split the
bracelet at the clasp before you get started.
Once the bracelet is removed, reinsert the spring pins into the alternate bracelet and attach it to the case in the
appropriate holes inside the horns.
Please note that adjusting and exchanging the bracelet is,
in essence, the work of a jeweler.
If in doubt, take it to a professional.
We have included the basic tools for you to do it yourself.
Work from the back on a soft surface and be careful.
DST considerations.
Across the world there are upwards of a dozen different "Daylight Saving Time" systems of which some are
determined on an annual basis by local governments.
When setting location by any of the 583 city listings DST has already been programmed.
In the event you need to override DST go to SET HOME or SET AWAY, then push L and DST AUTO will
appear.