This document is a manual how to start the printer. This document Is not recommended to use for repair
or hardware / software upgrade. If you have any technical questions regarding the printer installation and
configurations please send us an email to [email protected]
Note:
Please switch OFF printer power prior to plug in the power cord to printer power jack.
When the battery is charging, please do not remove the battery from the printer,
otherwise, please re-plug the power cord into a power outlet.
Charger works in 220/240 Volts sockets
When the battery is charging, the colour of battery status LED indicator is solid
amber.
Note: When charging over 4 ~ 8 hrs, the battery is completely
charged and the amber of LED indicator will be off.
In the front side of the printer click on the grey button to open the top cover and load the
labels
