HEADLIGHT ATTACHMENT
Attach headlights to front crossmember using
bolts and nuts provided with headlights.
Note: When spacing headlights on
crossmember, allow enough space for the
center foam wrap (see page 22).
16
HEADLIGHT ASSEMBLY INSTRUCTIONS
CONNECTING THE HEADLIGHTS TO THE WIRING HARNESS
The wiring harness contains one RED wire and one BLACK wire (both with female plugs).
Plug male end of RED splitter into the RED wire from the wiring harness.
Plug male end of BLACK splitter into the BLACK wire from the wiring harness.
Each headlight has one RED wire and one BLACK wire (all four wires have male plugs).
Plug the RED wire (one from each headlight) into the female ends of RED splitter.
Plug the BLACK wire (one from each headlight) into the female ends of BLACK splitter.
For parts or service call 1-888-926-6554 • www.yerf-dog.com
Estimated assembly time: 25 min
All headlight hardware can be
found in the headlight bag.
Phillips screwdriver
TOOLS REQUIRED
HEADLIGHT
WIRING
HARNESS
ATTACHMENT
The headlight
wiring harness is
located just behind
the driver’s seat.
Cut wire tie from
harness (Caution:
Be carefull not to
cut the wires) and
route harness as
shown. Use wire
ties provided to
secure harness to
brush gaurd.
