Yerf-Dog 32001 Series, Руководство пользователя

Страница: 14 / 19

14
5. Join and secure the FRONT BRUSH GUARD
(20) to the ends of the REAR BRUSH GUARDS
(51) using the hardware shown.
6. Mount the end of the SHOULDER BELT to
the side of the MAIN BRUSH GUARD (21)
using the hardware shown.
NOTE: Do not overtighten the hardware
attaching the end of the SHOULDER BELT.
The BELT must rotate.
7. For added security, strap the SAFETY FLAG
(34) tightly to the the REAR BRUSH GUARD
(51) using WHITE CABLE TIE (35). Cut off and
discard the excess CABLE TIE.
1. Secure the MAIN BRUSH GUARD (21) to the
middle tabs on the FUN-KART FRAME, behind
the SEAT, using the hardware shown.
2. Secure the REAR BRUSH GUARD (51) and
SAFETY FLAG (34) to the rear tabs on the
FRAME using the hardware shown.
3. Align holes and secure the REAR BRUSH
GUARDS (51) to the top of the MAIN BRUSH
GUARD (21) using the hardware shown.
4. Secure the FRONT BRUSH GUARD (20) to
the front tabs on the FRAME using the
hardware shown.
TAB
FUN-KART
FRAME
TAB
TAB
SHOULDER
BELT
FRONT BRUSH
GUARD
REAR BRUSH
GUARD
MAIN BRUSH
GUARD
TAB
SAFETY
FLAG
BRUSH GUARD ASSEMBLY INSTRUCTIONS
BRUSH GUARD HARDWARE
Item Description Qty.
9 BOLT, 3/8"-16 X 1-3/4" HEX 1
13 BOLT, 5/16"-18 X 1-1/2" HEX 1
24 NYLON SPACER 1
35 CABLE TIE (WHITE) 1
45 NUT, 3/8"-16 NYLOCK 1
47 NUT, 5/16"-18 HEX 8
63 BOLT, 5/16"-18 X 1" HEX 5
64 BOLT, 5/16"-18 X 2-1/4" HEX 4
88 WASHER, 3/8" FLAT 2
89 WASHER, 5/16" FLAT 18
104 WASHER, 5/16" LOCK 2
WHITE
WIRE TIE