3
is powered by an E318E12 12V AC-DC power supply
(included). PD-7 has separate GAIN (9,12) and VOLUME controls
both for clean (21) and overdrive (20) channels. Switching
between channels is done using the CH 1/CH2 button switch. A
separate 3-band equalizer (BASS, MIDDLE, TREBLE –
PD-7
3,4,6,15,16,17) is located before the overdrive section for CH 1
and after the overdrive section for CH 2 Switching between CH 1
and CH 2 is indicated by a dedicated LED (10). It is green when
CH 1 is active and orange when CH 2 is being used. The input
sensitivity is selected by a LO/HI button switch (16).
When LO mode is engaged, the dedicated LED (11) lights
green and when running the HI mode the LED lights red.
CH 1 has a special BRIGHT (13) switch that allows to obtain a
more bright and sparkling tone. Its performance is mostly
noticeable when the GAIN 1 control is turned half-way or less.
OUTPUT (1) jack uses two modes that are selected with the
CAB.SIM (19) switch.
USING THE DEVICE
17
.
– low frequencies control (CH 2)
BASS
18
.
– sensitivity switch
LO/HI
19
.
– speaker simulation mode switch
CAB.SIM
20
.
– CH 1 volume control
VOL 1
.
– CH 2 volume control
21
VOL 2
1 .
CH 1/CH 2
4
switch
15
.
– high frequencies control (CH 2)
TREBLE
16
.
1
– mid frequencies control (CH 2)
MIDDLE
Содержание Pterodriver PD-7
Страница 7: ......
