USE OF PRODUCT
Power supply of pedals BC-1 from the battery type 6F-22, which
is installed under the bottom cover of the pedal, or from an external
source of stabilized voltage 9V.
Turn on the power from the battery,when connecting the Jack
(mono only) to the input Jack, so to prolong the battery life, do not
leave Jack in the input connector.
Connect the DC adapter Jack (5) or the battery.
Connect the pedal as shown.
Turn on the amplifier.
.
Set the knobs
BASS, MIDDLE, TREBLE
and
GAIN
controls to
the middle position, the
VOLUME
pedal eliminate the difference
in volume when turned on and off mode. Rotate the knobs adjust
the sound you need.
Attention! Because of the particular circuitry during installation of
the three regulators
BASS, MIDDLE, TREBLE
and
GAIN
control
to position zero, the sound output will not pedal.
OLDIE
S
R
Amplifier
BC-1
Guitar
3
Adapter 9V DC
