②
To be back to upper menu, press the red button.
5.8 GPS setting
It is consisted of 4 kinds sub-menus.( Method, Interval, Sync Slots, Slot No). Selection is
done by the right knob(Encoder). Setting is by pressing the right knob.
To send your location data, you must first install a GPS unit onto the transceiver. Press the
key programmed as send the GPS data to transmit your location data. Ask your dealer for
details.
5.9 Software version
It shows the version of Front & Main’s firmware.
6. Terminal Description
ACC(D-SUB 15 Pin Connector)
Pin NO
Pin Name
Description Specification
I/O
Remake
1
DC+13.6V
DC Power Output
13.8±15%
O
2
IGN
Ignition Signal Input
Power ON :
↑
8V
Power OFF :
↓
6V
I
3 EXT_SPK Loudspeaker
Output 4
Ω
, 4Watt
O
4 AF_OUT Audio
Output
500mV
O
5 EXT_MIC Audio
Input
5
㏀
I
6
TXD/FCN1
TX Serial Data
3.3V TTL
O
7
RXD/FCN2
RX Serial Data
3.3V TTL
I
8 FCN3
Programmable High
Impedance
I/O
9 FCN4
Programmable High
Impedance
I/O
10 FCN5
Programmable High
Impedance
I/O
11 FCN6
Programmable High
Impedance
I/O
12
DC+5V
DC Power Supply
DC+5V Max 100mA
O
13 HR1
Horn Alert Signal
Output
Max 3A
O
14 HR2
Horn Alert Signal
Max
3A
O