③
To move back to upper menu, press the red button.
2) SELCALL
①
Rotate the right knob(Encoder) to select Yes or No.
②
Press the knob to set, back to upper rank.
③
To move back to upper menu, press the red button.
5.3 Status setting
It is consisted of two kinds like “Send” or “Receive Check”. Pre-programmed Status is sent
to the ID to be wanted receiving. And the receiving message can be checked. (Refer to
menu table)
1) Send
①
Display pre-programmed Status. Rotate the right knob(Encoder) to
select a status to be sent, press the right knob(Encoder) to set.
②
Rotate the right knob(Encoder) to select the ID which you wanted to
send the status. And then press the right knob(encode) to set.
③
After Automatically getting out of the menu, the radio send the status,
a receiver’s ID and a sender’s ID orderly.
2) Receive
Check
①
Rotate the right knob to select the received status for reading. And
then press the right know to check the sender’s ID.