11
Specifications of DC-100 Charger :
• Adaptor Input Voltage : AC 100 ~ 240V
• Adaptor Output Voltage : DC 5V
• Battery
: XSB-1800
• Quick Changing Tume : In3Hours and half
• Operation Temperature
: 0℃~+50℃
• Size
: 76(W)x85(D)x37(H)m/m
• Charging Current : 750mA(Fast charging)
6. Operating Instructions of XR-2400 Radio
6.1 Power On/Off
Turn Power switch clockwise. As soon as power is supplied, the backlight will be turned on.
If the user had set up the user ID, it will be displayed on the LCD and radio will enter into the
latest state as a signal sound is generated.
When turning (power) on the radio by pressing a button on it, the radio
may enter into a special modes in which transmission and reception is
impossible. Please don’t turn on the radio by above way.
6.2
Transmission Method
For transmission, press PTT button on the left side of the radio. As soon as the user presses
keys according to the setting, DTMF ID will be transmitted, and during this time, voice
communication will be interrupted for several seconds. Then, red LEDs for transmission and
reception will be turned on. It is recommended to talk 5 ~ 10cm away from the microphone
for the best voice communication.
.
☞ Note: If the user makes transmission for more than a certain time while BCLO or TOT
feature is on, transmission will be forcefully disconnected for other users.
If present channel is TX Inhibited by pc program, TX will not be worked.
(By PC Program, it could be set)
6.3 Reception Method
The user should not press PTT button during the reception. The user can adjust the volume by
Volume switch, and during reception, the green LED will be turned on. Depending on conditions
