7
4. Basic operation
Please fully read the instruction manual before use.
This manual provides important information related to radio operation.
4.1 Antenna installation and removal
To install the antenna, insert the antenna into antenna connector and screw the antenna clockwise.
To remove the antenna, screw the antenna counter clockwise.
Figure 4-1) Antenna installation and removal
When installation of the antenna, giving a strong pressure to the Radio or pulling the
antenna with a strong power from the Radio can make damage on the antenna
connector, which may cause the Radio to have a critical problem.
4.2 Battery installation and removal
Removal of the battery is shown in Figure 4-2.
Slide the rear cover in the direction of the top and open the cover. And then remove the battery.
Slide and hold down, the battery is inserted. Insert the back cover to the below hole and press the
cover as shown in Figure 4-3. Then the cover will be equipped.
