- 11 -
Mounting and unmounting the
power supply must be done from
the inside as shown left. Four
screws are used to secure the
power supply to the cabinet back
side.
7. Rolling Wheel Constructed
There are four rolling wheels
could be used in this cabinet,
each wheel could be and must
to be fastened tightly by two
screws.
To avoid the unexpected
moving and vibrating, two
lockable wheels could be set on
by pushing the locking pad.
- 12 -
III.
System Components
1. Cabinet Front Side
1.1 Chassis Security
To protect the chassis from
unauthorized intrusion, the
cabinet front panel can be
locked with the built-in key
lock.
1.2 Chassis Panels
There are two identical side panels on this cabinet, one on each side.
Each panel is secured by four screws on the front of the cabinet.
1.3 Message LED Description
There are 16 LEDs show on the middle of front panel. The first LED
represents the power on message of system active (connect to
motherboard), the second LED shows power supply status (connect to
redundant power supply), the other 14's are represented the HDD
situation.
2. Cabinet Back Side
The back side of the cabinet is provided to show the back exterior
components of this cabinet. That will be including,
