The integrated lithium 230mAh battery provides up to 90 days of standby
operation and lifetime of up to 90 hours when used to the full. To ensure a long
lifetime, the keyboard will switch into the power save mode after 3 seconds if
the FN mode is inactive.
To prolong the intervals between charging, we recommend to turn the keyboard
off with the ON/OFF switch in case of a prolonged inactivity.
A LED over the Pause ( ) button will alert you if the keyboard needs to be
recharged.
The charging connector can be found on the right top side of the keyboard. The
necessary micro USB charging cable is supplied.
You can use the keyboard even in the charging mode to continue with your work.
It takes a just a couple of hours to reach the full charge.
The Yenkee YKB 2000 keyboard is a wireless Plug-and-Play device. Thus, it does
not require any specific program to function correctly. Connect the attached
USB dongle to a free USB-A port on your device and wait for your operating
system to install required drivers automatically.
Slide the switch in the top right corner from OFF to ON position and the
keyboard is now ready to be used.
Charging the keyboard
Keyboard connection
USER´S MANUAL
EN
