Yenista Optics OSICS, Руководство пользователя

Страница: 30 / 252

Turning On/Off and Initializing the OSICS Multifunction Platform
30 OSICS User Manual
4. Select ENTER by pressing the right control button.
After password identification, each module is initialized, turned on (the green LED is
lit) and set to the power-up wavelength.
At the end of the initialization routine, the STARTUP configuration is loaded on the
OSICS Mainframe and on each installed module (for more details on working
configurations, see section Setting a Working Configuration, p. 45 ).
The System Status screen appears.
System Status
Screen
Description
The System Status screen provides a general overview of the state, configuration and
operating parameters of the system.
Figure 9: System Status Screen
Menu bar
The menu bar is displayed at the upper part of all screens.
It includes the following tabs:
• The Main menu tab enables you configure the OSICS Mainframe (see section
Accessing the OSICS Mainframe Main Setup Menu, p. 33 )
• One tab for each OSICS module, from left to right (1 to 8), to configure each module
individually (see section Accessing an OSICS Module Setup Menu, p. 33 ).
To select a tab, turn the rotary knob to highlight the wanted tab and press the knob to
enter the tab menu.
Mode area
The mode area displays the following read-only information:
• Current system operating-mode (for more details, see OSICS Programming Guide ).
• Working configuration currently active (for more details, see section Setting a
Working Configuration, p. 45 ).
Parameters area
The Parameters area is a read-only table that displays the key operating-parameters of
the installed modules, as described in the following table.
Main 1 2 3 4 5 6 7 8
System Status
Mode : LOCAL Config. : STARTUP
CH Type F (GHz) P (dBm) Info
1 ATN 193415 55.00 dB
2 BKR 230610 02.04 dB
3 TLS 193700.0 +13.01 045
4 ECL 202562.5 -00.03 A
5 SLD 199861.7 +07.00
6 ECL 187370.3 -00.01 A
7 SWT Shut
8 SWT Ch1
Menu bar
Mode area
Parameters
area