YELLOWRIVER YR-W1004H, Руководство пользователя

Страница: 4 / 8

Safety Instruction

Please conserve this manual as operation guidance. If you sell this product to other user,

please make sure that they also receive this user manual.

Always make sure that you are connecting to the proper voltage and that the line voltage you
are connecting to is not higher than that stated on the decal or rear panel of the fixture.

The fixture is intended to indoor use only. To prevent risk of fire or shock, do not expose fixture
to rain or moisture. Make sure there are no flammable, explosive or corrosive materials
surrounded in 1.5 meter while operating.

The unit must be installed in a location with adequate ventilation, at least 50CM away from
adjacent surfaces. Be sure that no ventilation slots are blocked.

Do not operate at ambient temperatures higher than 95
℉
(35
℃
).

Safe wire should be used to install machine. Bearing of safe wire should be 3 times of the
machine weight. Complimentary signal cable transmits signals to 20 unit fixtures at most within
20meters. Signal amplifier is a must to connect more fixtures. Sectional area of complimentary
power cable is 1
㎡
. In daisy chain model, it allows to connect to 4 fixtures at most.

Always disconnect from the power source before servicing or replacing fuse/lamp and be sure

to replace with same fuse/lamp size and type. Cut off power before moving, repairing and
cleaning the machine.

Secure fixture using a safety chain and carrying handles. Never carry the fixture by its cord.

In case of failure or misfunction occurred, stop using the unit immediately.

Repairs carried out by unskilled people can lead to damage or malfunction. Buy the same

spare parts/components from manufacturer directly.

To avoid electric shock, all fixtures must be connected to circuits with a suitable ground. Make
sure the power cord is never crimped or damaged. Do not power on and power off the fixture in
a short time. For your safety, do not touch fixture when running.

When use DMX controller, please make sure that there is no interference sources(e.g. intercom,
high frequency radio waves and radiation source)
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt
any repairs yourself. In the unlikely event your unit may require service, please contact your local
distribution or after-sale service center.
For your safety
，
please read this user manual carefully before
operation. The machine should be operated by qualified engineer
！