Yedoo 12205-Y30, Руководство пользователя

Страница: 9 / 96

9
EN
Installation manual
2. 3. 1.
4.
Make sure that the pad tip fits into the
correct slot and then tighten both nuts.
First check that the front fork of the
scooter is aligned correctly (V-brake
arms or wheel fixtures towards the
front of the scooter), then release the
brake cable from the guide. Insert the wheel into the front fork so it
is exactly in the middle.
Caution: When
inserting the wheel, ensure that the
arrow on the tyre sidewall points in the
direction of rotation when the scooter
is rolling forwards.
5.
Handlebars installation
First loosen the stem screw, then install
the handlebars into the position as seen
in the picture, then tighten the screws
only slightly so you can adjust the angle
of the handlebars later on.
(Does not apply for Model Mau / Two /
One)
6.a
Insert the stem into the frame tube of
the scooter and adjust the handlebar
height taking care not to position it
above the marked line, see pic. 6.b.
Make sure that the handlebars are
straight and then tighten the screw
on the stem.
The installation is the same for
all models, it diff ers only in minor
details (see additional pictures).
Installing the front wheel
Loosen both nuts
Direction
of rota-
tion
18–20 Nm
20–22 Nm