![background image](http://html1.mh-extra.com/html/yeastar-technology/ye110/ye110_instruction_3243917002.webp)
YE110 Instruction
- 2 -
LED Status Identifying:
Standard Package:
1 E1 card; 1 E1/T1 cable and Hardware Instruction Sheet
PCI Compatibility:
The YE110 card is a 32-bit 33MHz card that can be used in universal 3.3 volt or 5.0 volt
operation and compatible with any PCI 2.2 or greater slot.
Please check the type of PCI slot on your motherboard to be sure it’s compatible with
your card. You can identify it by comparing it to those shown in following Figure 2.
Figure 2
Physical:
Size: 13.4 x 6.5 x 1.6 cm (5.27” x 2.559” x 0.63”) excluding the PCI bracket
Weight: 57g
Interfaces: E1, T1, J1 PRI; RJ45
PCI Bus: 3.3V or 5V slot, half-length slot minimum size, 33 MHz minimum bus speed,
PCI 2.2 or greater.
Software Installation
Please download the driver and guide from
http://www.yeastar.com
If you have any
problem about it, please contact us through
Warranty:
Yeastar is responsible for the quality of all cards and modules. Included
with the purchase of the YE110 is 30 days of email technology support to get your
card running, 3 years warranty of hardware performance.
Yellow Light: port is online. Card is receiving a red alarm from the far end.
Red Light: port is active. Card is not seeing far end, local error.
Green Light: port is online. Status is normal without alarm or error.
Off Light: Port is not enabled.
32-bit 5.0 volt PCI Slot
32-bit 3.3 volt PCI Slot