TA1610 User Manual
28/62
Items
Description
Call Destination
Choose the trunk or trunk group to route the incoming calls
to.
Hotline
Direct number to the SIP Server. The parameter is ignored
if a SIP Account is selected on this route.
Two-stage Dialing
Enable or Disable Two-stage Dialing.
Outbound Dial Pattern
Outbound calls that match this dial pattern will use this
outbound route.
Strip
Allows the user to specify the number of digits that will be
stripped from the front of the phone number before the call
is placed. For example, if users must press 0 before dialing
a phone number, one digit should be stripped from the dial
string before the call is placed.
Prepend
These digits will be prepended to the phone number before
the call is placed. For example, if a trunk requires 10-digit
dialing, but users are more comfortable with 7-digit dialing,
this field could be used to prepend a 3-digit area code to all
7-digit phone numbers before calls are placed.
Port->IP/Port
Port->IP/Port routes are used to control incoming calls to PSTN trunks on TA1610
and route the calls to your SIP server or another PSTN trunk on TA1610.
Click
“Edit” to check the route details, there are two modes for you.
1) Simple Mode
Choose
“Yes” for Simple Mode, the simple mode configuration page appears as
below.
Figure 5-3 Simple Mode Route
