![background image](http://html2.mh-extra.com/html/yeastar-technology/ta100/ta100_user-manual_3243141036.webp)
TA100/200 User Manual
36/52
3) Port
In
“Port” tab, you can check SIP port and HTTP port. You can also enter the relevant
page by clicking the button in
“Setting” column.
Figure 9-3 Security Center
—Port
AMI Settings
The Asterisk Manager Interface (AMI) is a system monitoring and management
interface provided by Asterisk. It allows live monitoring of events that occur in the
system, as well enabling you to request that Asterisk perform some action. The
actions that are available are wide-ranging and include things such as returning status
information and originating new calls. Many interesting applications have been
developed on top of Asterisk that take advantage of the AMI as their primary interface
to Asterisk.
There are two main types of messages on the Asterisk Manager Interface: manager
events and manager actions.
The 3
rd
party software can work with TA100/200 using AMI interface. It is disabled by
default. If necessary, you can enable it.
Figure 9-4 AMI Settings
User Name, Password & Port
After enabling AMI, you can use this username and password to log in TA100/200.
The default port is 5038.
Permitted "IP address/Subnet mask"