![background image](http://html2.mh-extra.com/html/yeastar-technology/ta100/ta100_user-manual_3243141029.webp)
TA100/200 User Manual
29/52
6) Advanced Settings
Figure 7-5 SIP Advanced Settings
Table 7-3 Description of SIP Advanced Settings
Items
Description
Caller ID Field
Decide the caller ID will be extracted from which
field of the SIP packets.
DID Field
Decide the DID number will be extracted from
which field of the SIP packets.
180 Ringing
It is set when the telecom provider needs. Usually
it is not needed.
Remote Party ID
Whether to send Remote-Party-ID on SIP header
or not. Default: no.
Allow Guest
Whether to allow anonymous registration
extension or not. Default: no. It
’s recommended
that it is disabled for security reason.
Pedantic
Enable pedantic parameter. Default: no.
Alwaysauthreject
If enabled, when TA100/200 rejects incoming
“Register” or “Invite” packets, TA100/200 always
respond the packets using “SIP403Forbidden”.It’s
recommended that it is enabled for security
reason.
OPTIONS Response 200
Whether to respond
“200 OK” to an OPTION
message.
Session-timers
Enable session-timer mode, default: yes. If you find
the call is cut off every 15 minutes every time,
please disable this.
Session-expires
The max refresh interval
Session-minse
The min refresh interval, which mustn't be shorter
than 90s.
Session-refresher
Choose the session-refresher, the default is Uas.