Yeastar Technology N824 Скачать руководство пользователя страница 99

Страница: 99 / 104

N824 User Manual

System Maintenance

This chapter describes system maintenance settings including the followings:







Firmware Upgrade

N824 provides automatic updates, new firmware file will be checked via a cloud server.

In addition, firmware upgrade can be done via HTTP and TFTP manually on N824.

Please go to

System→ System Preferences→ Firmware Update

to do upgrade.

Note:

If ―Reset configuration to Factory Defaults‖ is enabled, the system will restore to
factory default settings.

When update the firmware, please don’t turn off the power. Or the system will get
damaged.

3. If you are trying to upgrade through HTTP, please make sure that your N824 is

able to visit external network, or it cannot access Yeastar website to get the

firmware file, causing the upgrade fail.

Automatic Updates

Figure 20-1 Automatic Updates

Содержание N824









































































































Результаты поиска

Содержание N824

Отзывы:

Yeastar Technology N824, Руководство пользователя, Страница: 99 / 104

Результаты поиска

Содержание N824

Отзывы: