Yeastar Technology N824 Скачать руководство пользователя страница 87

Страница: 87 / 104

N824 User Manual

PBX Basic Settings

This chapter explains PBX basic settings, which can be applied globally to N824. The

basic settings can be configured under

PBX→Basic Settings



General Preferences



Business Hours

General Preferences

1) General Settings

Table 17-1 General Preferences-General

General Settings

Max Duration

The absolute maximum amount of time permitted for a call. A

setting of 0 disables the timeout. The default value is 6000s.

Music On Hold

Used to set hold music for the system.

Tone Region

Select country to set the default tones (dial tone, busy tone, ring

tone and etc.) to be sent from FXS port.

The default setting is United States/North America.

Dsp Fax

Enable Dsp to optimize Fax reception.

FXO Mode

Select country to set the On Hook Speed, Ringer Impedance,

Ringer Threshold, Current Limiting, TIP/RING voltage

adjustment, Minimum Operational Loop Current, and AC

Impedance as predefined for your country's analog line

characteristics.

The default setting is FCC for USA.

Attended Transfer

Caller ID

When transferring an incoming call using the attended transfer

feature code or the transfer key of IP phone, the Caller ID of

transferee or transferer displayed on the screen of the callee.

The default display is the Caller ID of the initiator.

Follow Me Prompt

―Enable Follow Me Prompt‖ choosing yes, there will be

prompt before transferring the call. Otherwise, the call will be

transferred directly without any prompt. Default: Yes.

Music on hold for

Follow Me

Configure whether to play a prompt

―please hold while I try to

locate the person you are calling‖ when transfer a call by follow
me settings.

Invalid Phone Number

Prompt

Configure the prompt when the dialed phone number is invalid.

Busy Line Prompt

Configure the prompt when the dialed phone number is busy.

Dial Failure Prompt

Configure the prompt when dial failed due to conjunction

Содержание N824









































































































Результаты поиска

Содержание N824

Отзывы:

Похожие инструкции для N824

Бренды по названию

Популярные бренды

Yeastar Technology N824, Руководство пользователя

Результаты поиска

Содержание N824

Отзывы:

Похожие инструкции для N824

Бренды по названию

Популярные бренды