Yeastar Technology N824 Скачать руководство пользователя страница 34

Страница: 34 / 104

N824 User Manual

configuration or your firewall's support of SIP and/or RTP ports.

Qualify

Send check alive packets to IP phones.

Enable SRTP

Enable extension for SRTP (RTP Encryption).

Transport

This will be the transport method used by the extension. The

default is UDP.

DTMF Mode

RFC4733, Info, Inband, Auto.

Remote Register

Allow to register remote extensions.
If you enable ―Remote Register‖, the extension password must
include uppercase letters, lowercase letters, and digits.

3) Advanced Settings

Table 6-6 VoIP Extension Configuration

—Advanced Settings

Items

Description

Call Waiting

Check this option if the extension should have Call Waiting

capability. If this option is checked, the

―When busy‖ follow me

options will not be available. The call waiting function of IP

phone has higher priority than N824

’s call waiting function.

DND

on’t Disturb. When DND is enabled for an extension, the

extension will not be available.

Enable Busy Camp-

If a dialed extension or a desired line is busy, with this feature,

when the extension or line becomes idle, your telephone will ring

automatically, so you can pick up to speak with the extension or

seize the line and dial an external number.

Ring Out

Check this option if you want to customize the ring time. Ring

tone will stop over the time defined.

Follow me

Call forwarding for an extension can be configured here. The

administrator can configure Follow Me option for this extension.

If you want to transfer the call to an outbound number, please

follow the dial pattern of outbound route filled in the outbound

number.

For example: transferring to your mobile phone number
123456789, the dial pattern of outbound route is ―9.‖, you should
fill in 9123456789 here.

IP Restriction



Enable IP Restriction

Check this option to enhance the VoIP security for MyPBX.

If this option is enabled, only the permitted IP/Subnet mask

will be able to register this extension number. In this way,

the VoIP security will be enhanced.



Permitted “IP address/Subnet mask”

The input format should be

―IP address‖ + ―/‖ + ―Subnet

mask‖.
E.g."192.168.5.100/255.255.255.255" means only the

Содержание N824









































































































Результаты поиска

Содержание N824

Отзывы:

Похожие инструкции для N824

Бренды по названию

Популярные бренды

Yeastar Technology N824, Руководство пользователя

Результаты поиска

Содержание N824

Отзывы:

Похожие инструкции для N824

Бренды по названию

Популярные бренды