Yeastar Technology MyPBX U200, Руководство администратора

Страница: 36 / 135

MyPBX U200 Administrator's Guide
www.yeastar.com Page 36
· Port
The extension correspond port.
· Name
A character-based name for this user, i.e. „Bob Jones‟ .
· Caller ID
The Caller ID (CID) string will be used when this user calls another internal user.
2)
Voicemail
· Enable Voicemail
Check this box if the user should have a voicemail account.
· Voicemail Access PIN #
Voicemail Password for this extension, i.e. „1234‟ .
3)
Mail Setting
· Enable Send Voicemail
Once enabled, the voicemail will be sent to the below email address as an
attachment.
· Send Voicemail to Email Address
This option defines whether or not voicemails/Fax is sent to the Email address
as an attachment.
Note : Please ensure that all voicemail settings are properly configured on the
System Settings -> Voicemail Settings page before using this feature.
4)
Flash
· Hook Flash Detection
Sets the amount of time, in milliseconds, that must pass since the last
hook-flash event received by MyPBX before it will recognize a second event. If a
second event occurs in less time than defined by Hook Flash Detection, then
MyPBX will ignore the event. The default value of Flash is 1000 ms, and it can be
configured in 1ms increments.
5)
Group
· Pickup Group
If this extension belongs to a pickup group, any calls that ring this extension can
be picked up by other extensions in the same pickup group by dialing the Call
Pickup feature code (default *4).
Note : *4 is the default setting, it can be changed under Feature Codes ->
General -> Call Pickup.