Yeastar Technology MyPBX U100, Руководство по установке

Страница: 128 / 197

MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 112
Note: Add an extension in blacklist, such as 300:
1) If the type is “inbound”, then this extension can‟t dial other extension and
external numbers, but it can dial IVR or ringgroup.
2) If the type is “outbound”, then this extension can‟t be called.
6.7.4 Callback Settings
MyPBX allows caller A to dial an inbound route number, and after hearing the
ring, A can hang up the call or wait for MyPBX to cut off the call, then MyPBX will
call A with this number. When A picks up the call, A can dial the number he
wants to call; MyPBX will call the number with its outbound route.
Note:
1. If you‟d like to use callback feature, please make sure it‟s enabled on the
inbound route setting panel.
2. No callback rules needed to be set if the trunk supports call back with the
caller ID directly.
Figure 6-63
· Allow All Numbers
If you want to apply Callback function to all incoming numbers, please tick Allow
All numbers.
Follow the step to use this function.
Step 1: Enable Callback.
Inbound Routes – Choose “Yes” on” Enable Callback” to enable this function.