Yeastar Technology MyPBX Standard V6, Руководство администратора

Страница: 125 / 219

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 125
SPEEX: Speex is an Open Source/Free Software patent-free audio compression
format designed for speech. The Speex Project aims to lower the barrier of entry
for voice applications by providing a free alternative to expensive proprietary
speech codecs. Moreover, Speex is well-adapted to Internet applications and
provides useful features that are not present in most other codecs.
G.726: A PSTN codec, used worldwide, that provides good voice quality and
consumes 32kbit/s in each direction (receiving and transmitting) of a VoIP call.
G.726 is supported by some VoIP phones.
ADPCM, G.729A, H261, H263, H263p, H264 .
Note: If you would like to use G.729, please enter your license.
6.7.3 Blacklist
Blacklist is used to block an incoming/outgoing call. If the number of
incoming/outgoing call is registered in the number blacklist, the caller will hear
the following prompt: ―The number you have dialed is not in service. Please
check the number and try again‖. The system will then disconnect the call.
Figure 6-68 Blacklist List
We can add a number with the type: inbound, outbound or both.
Figure 6-69 Add a Number as Blacklist
Note: Add a phone number in blacklist, such as ―05921234567‖:
1) If the type is ―inbound‖, then this number can‘t be called.
2) If the type is ―outbound‖, then the extensions in MyPBX can‘t call this
number.