Fanvil IP Phone Configuration Guides
8/13
3 Provisioning Fanvil Phones
The easiest way to set up a Fanvil phone for use with MyPBX is to use the built-in plug
and play provisioning functionality inside MyPBX. This will allow the phone to
configure itself by retrieving a generated phone configuration file. Alternatively you
can configure using DHCP and option. For more information, see this configuration
guide.
1) Verify Firmware Installed on your Phone
Verify the firmware version currently installed on the phone as older firmware will not
have the plug and play feature. To check the firmware version, power up the phone
and click “
Menu
Status
” on the phone. Go to Fanvil Support Website to download
the latest firmware for your phone.
2) Plug phone into the network
Plug your Fanvil phone into your LAN. (The Phone must be on the same LAN as that
of MyPBX IP PBX).
3) Configure Fanvil Phones and Assign Extensions
MyPBX supports to provision Fanvil phones via PnP mode and DHCP mode. If you
choose DHCP mode, you need to set MyPBX as the only DHCP server in the local
network.
