Escene IP Phone Configuration Guides
Phone display
8)
Sip Sever: set the "Sip Sever" field to the IP Address of the MyPBX
server – in this example, 192.168.5.151
9)
NAT Traversal: the default setting is Disable, if you want to
configure the phone as a remote extension ,you should chose
STUN
，
then enter a correct address in the field of “ STUN Sever”
10)
BLA: off
11)
Register Method
：
chose the method corresponding to the Account
Mode
12)
DNS-SRV: off
13)
Sip Transport: UDP
5.
Call Section
Figure 3
1)
Do Not Disturb: off
2)
Anonymous Call: off
3)
Use Session Timer: off
4)
Allow-event: off
5)
Registered NAT: on
6.
Security Section:
Figure 4
1)
SIP Encryption: off
2)
RTP Encryption: this is an SRTP option, you must chose “off”,if you
want to chose “on”, please enable SRTP in MyPBX first
7.
Click the button “Submit” and the phone will register with
your MyPBX. This
can be verified via “Status” page of MyPBX management console.
