http://www.ysvacuumsealer.com
8
5. Once the indicator light has turned off, press the release buttons on both sides of the
machine to release the bag.
How to Use the Vacuum Sealer with a Canister
NOTE :
Canister is not included, accessory hose may not fit all canister lids.
1. Wipe canister cover, canister base and ensure they are clean and dry.
2. Place food into canister and leave at least one inch of space between food and cover.
3. Place cover onto canister, insert one end of accessory hose into port on appliance.
Put the other end onto canister port ; pressing down firmly to ensure a tight fit.
4. Close lid by pressing down on both sides. If the lid cannot be lifted, then you have
successfully locked the lid in place.
5. To begin the vacuum process, press the ’’Vacuum & Seal’’ button. The unit will
continue to vacuum and then seal once air has been removed.
6. Once the indicator light has turned off, it is safe to remove accessory hose from
machine and canister.
Care & Cleaning
1. Always unplug the unit before cleaning.
2. Do not immerse in water.
3. Do not use abrasives to clean the unit.
4. Wipe the outer surface with a soft, damp cloth and soap.
5. To clean the inside of the unit, wipe away any food or liquid with a paper towel.
6. Dry all parts thoroughly before you plug in and operate the unit again.
7. Vacuum chamber may trap liquids that were drawn from the bag ; use a mild dish
washing soap and a warm, damp cloth to wipe away any left behind liquid from the
vacuum chamber. Dry thoroughly.
Trouble Shooting
Nothing happens when I press the ’’Vacuum & Seal’’ button:
Make sure the power cord is correctly plugged into the electrical outlet.
Make sure the power cord is not damaged in any way.
Make sure the electrical outlet is operative by plugging in another appliance. If it’s not,
please check the circuit breakers or fuses in your home.
