PaloSanto Solutions
Yealink SIP-T28P Server Setup Guide
7
MANUAL CONFIGURATION
1. Use the information from the Add SIP Extension page (Figure 4-4) to enter the
following necessary information on “
Account => Account 1
” section of the Yealink
Phone WebUI:
Line Active: ON
Display Name: YealinkUser
Register Name: 301 in this example
User Name: 301 in this example
Password:
‘h7Dka3Rf9si0t’ in
this example
SIP Server:
Elastix Server’s IP Address (192.168.1.65 in this example)
Figure 4-8. Account
2. Once you have entered the
required information, click on “Confirm”
button located at
the end of the page. The phone should be registered now. To check this, refresh the
current page and see the Register Status of the account. If the phone is not registered,
make sure you’ve entered the
correct information (Figure 4.9).
Figure 4.9. Register Status
3. Configure the other IP (SIP) Phone with the correct parameters.
PaloSanto Solutions
Yealink SIP-T28P Server Setup Guide
7
MANUAL CONFIGURATION
1. Use the information from the Add SIP Extension page (Figure 4-4) to enter the
following necessary information on “
Account => Account 1
” section of the Yealink
Phone WebUI:
Line Active: ON
Display Name: YealinkUser
Register Name: 301 in this example
User Name: 301 in this example
Password:
‘h7Dka3Rf9si0t’ in
this example
SIP Server:
Elastix Server’s IP Address (192.168.1.65 in this example)
Figure 4-8. Account
2. Once you have entered the
required information, click on “Confirm”
button located at
the end of the page. The phone should be registered now. To check this, refresh the
current page and see the Register Status of the account. If the phone is not registered,
make sure you’ve entered the
correct information (Figure 4.9).
Figure 4.9. Register Status
3. Configure the other IP (SIP) Phone with the correct parameters.
PaloSanto Solutions
Yealink SIP-T28P Server Setup Guide
7
MANUAL CONFIGURATION
1. Use the information from the Add SIP Extension page (Figure 4-4) to enter the
following necessary information on “
Account => Account 1
” section of the Yealink
Phone WebUI:
Line Active: ON
Display Name: YealinkUser
Register Name: 301 in this example
User Name: 301 in this example
Password:
‘h7Dka3Rf9si0t’ in
this example
SIP Server:
Elastix Server’s IP Address (192.168.1.65 in this example)
Figure 4-8. Account
2. Once you have entered the
required information, click on “Confirm”
button located at
the end of the page. The phone should be registered now. To check this, refresh the
current page and see the Register Status of the account. If the phone is not registered,
make sure you’ve entered the
correct information (Figure 4.9).
Figure 4.9. Register Status
3. Configure the other IP (SIP) Phone with the correct parameters.
