Yealink Yealink SIP-T26P, Быстрый старт

Страница: 8 / 38

4
E
N
G
L
I
S
H
Basic Call Features
Placing a Call
Answering a Call
Ending a Call
Call Mute and Un-mute
Redial
Call Hold and Resume
To place a call on hold:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
1. With the handset on-hook, press .
1. Pick up the handset.
2. Enter the number, and then press the
Send
soft key.
1. With the headset connected, press to activate the headset mode.
2. Enter the number, and then press the
Send
soft key.
Note:
During a call , you can alternate between headset, hands-free speakerphone and handset modes by
pressing the
Headset
key or the
Speakerphone
key or picking up the handset. Headset mode requires a
headset connected.
Note:
You can ignore an incoming call by pressing the
Reject
soft key.
2. Enter the number, and then press the
Send
soft key.
Pick up the handset.
Press .
Hang up the handset or press the
Cancel
soft key.
Press .
Press or the
Cancel
soft key.
Press the
Cancel
soft key.
Press to enter the
Dialed Calls
list, press or to select the desired call, and then press
or the
Send
soft key.
Press twice when the phone is idle to call the last dialed number.
To resume the call, do one of the following:
Press to mute the microphone during a call.
Press again to un-mute the call.
If there is only a call on hold, press or the
Resume
soft key.
Press or the
Hold
soft key during an active call.