Yealink W80, Руководство администратора

Страница: 199 / 260

Administrator’s Guide for W80 DECT IP Multi-Cell System
196
You can enable call waiting feature and set the phone to play a warning tone to avoid missing important calls dur-
ing a call.
Yealink phones also support call waiting on code and off code to activate and deactivate server-side call waiting
feature. They may vary on different servers.
Topic
Call Waiting Configuration
Call Waiting Configuration
The following table lists the parameters you can use to configure call waiting.
Parameter call_waiting.enable <y0000000000xx>.cfg
Description It enables or disables the call waiting feature.
Permitted
Values
0 -Disabled, a new incoming call is automatically rejected by the phone with a busy message during a
call.
1 -Enabled, the phone screen will present a new incoming call during a call.
Default 1
Web UI Features > General Information > Call Waiting
Handset UI OK > Call Features > Call Waiting > Status
Parameter call_waiting.tone <y0000000000xx>.cfg
Description
It enables or disables the phone to play the call waiting tone when the phone receives an incoming
call during a call.
Note : It works only if “call_waiting.enable” is set to 1 (Enabled).
Permitted
Values
0 -Disabled
1 -Enabled
Default 1
Web UI Features > Audio > Call Waiting Tone
Handset UI OK > Call Features > Call Waiting > Tone
Parameter call_waiting.on_code <y0000000000xx>.cfg
Description
It configures the call waiting on code.
The phone will send the code to activate call waiting on server-side when you activate it on the
phone.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > General Information > Call Waiting On Code
Parameter
call_waiting.off_code <y0000000000xx>.cfg
Description
It configures the call waiting off code.
The phone will send the code to deactivate call waiting on server-side when you deactivate it on the
phone.
Permitted
Values
String within 32 characters