Yealink W60P Telesystem, Руководство администратора

Страница: 42 / 264

Phone Network
35
802.1x Authentication
Yealink IP phones support the following protocols for 802.1X authentication:
l
EAP-MD5
l
EAP-TLS (requires Device and CA certificates, requires no password)
l
EAP-PEAP/MSCHAPv2 (requires CA certificates)
l
EAP-TTLS/EAP-MSCHAPv2 (requires CA certificates)
l
EAP-PEAP/GTC (requires CA certificates)
l
EAP-TTLS/EAP-GTC (requires CA certificates)
l
EAP-FAST (supports EAP In-Band provisioning, requires CA certificates if the provisioning method is Authenticated
Provisioning)
For more information on 802.1X authentication, refer to Yealink 802.1X Authentication .
Topic
802.1x Authentication Configuration
802.1x Authentication Configuration
The following table lists the parameters you can use to configure 802.1x authentication.
Parameter
static.network.802_1x.mode
[1]
<y0000000000xx>.cfg
Description It configures the 802.1x authentication method.
Permitted
Values
0 -EAP-None, 802.1x authentication is not required.
1 -EAP-MD5
2 -EAP-TLS
3 -EAP-PEAP/MSCHAPv2
4 -EAP-TTLS/EAP-MSCHAPv2
5 -EAP-PEAP/GTC
6 -EAP-TTLS/EAP-GTC
7 -EAP-FAST
Default 0
Web UI Network->Advanced->802.1x->802.1x Mode
Parameter
static.network.802_1x.identity
[1]
<y0000000000xx>.cfg
Description
It configures the user name for 802.1x authentication.
Example :
static.network.802_1x.identity = yealink
Note : It works only if “static.network.802_1x.mode” is set to 1, 2, 3, 4, 5, 6 or 7.
Permitted
Values
String within 32 characters
Default Blank