To configure the network parameters for the base station manually:
1. Press the
OK key to enter the main menu, and then select Settings->System
Settings ->Network (default PIN: 0000)->Basic.
2. Select the desired IP addressing mode from the
IP Mode field.
3. Press to select the desired IP addressing mode.
4. Make the desired changes.
5. Press the
Save soft key to accept the change.
Note:
• The IP DECT phone supports either or both IPv4 and IPv6 addressing modes,
but IPv6 is disabled by default.
• Wrong network settings may result in inaccessibility of your DECT phone and
may affect the network performance. Contact your system administrator for
the network parameters.
Turning Handset On/Off
To turn the handset on, do one of the following:
• Press , then the LCD screen lights up.
• Place the handset in the charger cradle. The handset will be turned on
automatically.
To turn the handset off:
Long press to turn the handset off.
Locking/Unlocking Keypad
• Long press
when the handset is idle to lock the keypad.
• Long press
again to unlock the keypad.
Silent Mode
• Long press
when the handset is idle to switch the silent mode to on.
• Long press
again to switch the silent mode to off.
6
Basic Operations
