BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE
20-BD5561-00
©
2018 BROADSOFT INC.
PAGE 49 OF 117
5.2.6.2.2 No Touch Provisioning via Yealink Redirect Service
Yealink Device Management Redirect is a web redirect service hosted by Yealink. It
works in conjunction with the BroadWorks Device Management Redirect. Hence, prior to
device deployment, the administrator is required to login to Yealink’s web portal to
associate each device based on the MAC address to the default BroadWorks Device
Management URL. At boot time, the Yealink W60B IP DECT phones automatically
queries the Yealink Device Management Redirect service for the associated BroadWorks
URL. The Yealink W60B IP DECT Phone finally completes the provisioning process as
detailed in the previous section. For more information about the Yealink Device
Management Redirect service, go to
NOTE
:
If a secured (HTTPS) connection is required, then install the CA certificates or set the
security → trusted_certificates
to “disable” and restart the phone.
5.3 Upgrade from Previous CPE Kits
The previous configuration sections are primarily structured around importing or manually
configuring the Yealink W60B device profile types for the first time. Many of the steps are
unnecessary when upgrading to a new firmware release or CPE kit version.
For general instructions on upgrading, see
BroadWorks CPE Kit Usage Guide