Network Deployment
To ensure that the VC120 works correctly, please configure it according to the conference role that it plays. If it is in the
head office, please make sure that it can be reached from the public network. If it is in a branch office, please use an
intelligent firewall to deploy it, or just follow the same steps as for the head office.
Head Office
At least one static public IP address is required in the head office to allow branch offices to connect. The recommended
system configurations are as follows :
. To deploy the VC120 on a public network, you need to assign a static public IP address to the VC120.
. To deploy the VC120 in an Intranet, you must assign a static private IP address behind the firewall to the VC120. In
the meantime, do port mapping on the firewall for VC120.
Configure a Static IP
8
Firstly, configure a static IP for the VC120
For example: use the remote control to configure a static IPv4 address to your VC120.
. Menu->Advanced (Admin Password:0000)->LAN Configuration
Select
【
IPv4
】
from the
【
IP Mode
】
pull-down list
Select
【
IPv4
】
.
.
