Yealink VC110, Руководство администратора, Страница: 53 / 233

Getting Started
43

Gateway

Primary DNS (Domain Name Server)

Secondary DNS
You need to configure the network settings of the endpoint manually if any of them are
not provided by the DHCP server. For more information on configuring network settings
manually, refer to
Configuring Network Settings Manually on page 55 .
After the initializing process, the endpoint will complete startup by cycling the following
steps:
1. The LED indicator on the VC110 all-in-one unit illuminates solid green.
2. The display device displays the boot up screen.
3. The camera pans to the middle position automatically.
4. The display device displays the setup wizard (when you first start up, or reset the
endpoint, the display device will display the setup wizard)
For more information on how to complete the setup wizard, refer to Setup Wizard
on page 43 .
5. After completing the setup wizard, the display device displays the main screen.
The main screen displays the following:

Time and date

Endpoint IP address and site name

Status icon

Soft key labels

Video image
6. The VCP40 conferencing phone starts up normally. The phone‘s LCD screen
displays the site name, status icon, soft keys, time and date.
If the endpoint has successfully passed through these steps, it starts up correctly and is
ready for use.
When you first start up or reset the endpoint, the display device will display the setup
wizard.
To complete the setup wizard via the remote control:
1. Set the language displayed on the display device.