Yealink TR-069 Technote
5
RPC Method
Description
periodic Inform method calls) sometime in the future.
FactoryReset
This method resets the CPE to its factory default state.
TransferComplete
This method informs the ACS of the completion
(either successful or unsuccessful) of a file transfer
initiated by an earlier Download or Upload method
call.
AddObject
This method is used to add a new instance of an
object defined on the CPE.
DeleteObject
This method is used to remove a particular instance
of an object.
The ACS supports a variety of functionalities to manage a collection of phones using the
above RPC methods, the following primary capabilities are included.
Auto-configuration and dynamic service provisioning
The ACS can provision a phone or collection of phones based on a variety of criteria.
Different phone models can be configured using the uniform parameters. Phone can be
provisioned at the initial connection and re-provision at any subsequent time. The ACS
can also check the provision status (success or failure).
Firmware image management
Phone firmware can be upgraded or downgraded by downloading the firmware file
from the ACS. TR-069 also provides mechanisms for version identification and file
download initiation (ACS initiated downloads and optional phone initiated downloads).
The ACS can be notified of the success or failure of a file downloading.
Status and performance monitoring
The ACS can use the GetParameterValues and GetParameterAttributes methods to
monitor the phone’s status and performance statistics. TR-069 also defines a set of
mechanisms that allow the phone to actively notify the ACS of changes to its state.
Diagnostics
For troubleshooting purposes, the phone can send diagnostic information such as
network status to the ACS, or the ACS can execute the defined diagnostic tests to get
the information from the phone.
