Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1 3 0 0 0 5 4 6 4 5
www.jingl.com.au
Configuring Yealink W52P
1.
View and record the unique MAC address of the base station which can be found at
the rear of the base station. (Alternatively via the Handset)
Network Settings
You can configure the base station to obtain network settings in one of the following ways:
DHCP: By default, the base station attempts to contact a DHCP server in your network to obtain the
valid network settings, e.g., IP address, subnet mask, gateway address and DNS address
STATIC: If the base station cannot contact a DHCP server for any reason, you need to configure the
IP address, subnet mask, gateway address, primary DNS address and secondary DNS address for the
base station manually.
The Handset in the W52P package is pre-registered to the base station
For the purpose of this document we will accept that DHCP is functional and network settings are
automatically assigned
For further details refer to Yealink Documentation
http://www.yealink.com/DocumentDownload.aspx?Cateld=142&flag=142