l
Press again to un-mute the call.
Call Hold
l
Press the
Options
soft key during a call, and then
select
Hold
.
Call Transfer
l
While on a call, press
R
. Then dial the number you
wish to transfer call to.
Call Waiting
1. Press to enter the main menu.
2. Select ->Call Waiting.
3. Press or to select the desired value from the
Statu
s field.
4. Press or to select the desired value from the
Tone
field.
5. Press the
Save
soft key to accept the change or
the
Back
soft key to cancel.
Turning Speakerphone On/Off
l
While answering a call, press to turn
speakerphone on.
Turning Microphone Mute On/Off
l
While on a call, press to turn microphone mute
on.
l
Press to turn microphone mute off.
Turning Call Record On/Off
l
While on a call, press
*0
to turn call record on.
l
Press
*0
again to turn call record off.
Forwarding Calls
Note
: 8x8 recommends using online call forwarding
instead of phone-based call forwarding so your
call forwarding instructions are stored online
instead of on your phone. If you set your call
forwarding rules on your phone, they will not be
in effect if your phone is disconnected from an
Internet connection.
To enable online call forwarding (Virtual
Office):
1.
Log on to your Virtual Office Online dashboard at
http://virtualoffice.8x8.com
2.
Select
Settings
then
Call Forwarding
.
3.
Update your
Call Forwarding Rules
and press
Save
.
You can return to Virtual Office Online at any time to
update your Call Forwarding Rules.
Changing Settings
Adjusting Speaker/Headset Volume
1.
Press or during a call to adjust the volume of
the currently used audio device.
Adjusting Ringer Volume
1.
Press or when the handset is idle to adjust the
ringer volume.
Changing Ringing Tone
1.
Press the
OK
key to enter the main menu, and then
select
Settings
->
Audio
->
Ring Tones
->
Melodies
.
2.
Press or to highlight the
Intercom Call
option or the desired line.
3.
Press or to select the desired ring tone.
4.
Press the
Save
soft key to accept the change.
Adding Contact to Local Directory
1.
Press the
OK
key to enter the main menu, and then
select
Directory
.
2.
Press the
Options
soft key, and then select
New