Yealink T5 Series, Руководство администратора

Страница: 413 / 472

General Features
407
Default 0
Parameter account.X.callerid_in_support_header.enable <MAC>.cfg
Description It enables or disables the callerid attribute to be carried in the Supported header of the INVITE message.
Permitted
Values
0 -Disabled
1 -Enabled
Default 0
[1]
X is the account ID. For T58V/T58A/T56A, X=1-16; for CP960, X=1.
Return Code for Refused Call
You can define the return code and reason of the SIP response message for the refused call. The caller’s phone LCD
screen displays the reason according to the received return code. Available return codes and reasons are:
l
404 (Not Found)
l
480 (Temporarily Unavailable)
l
486 (Busy Here)
l
603 (Decline)
Topic
Return Code for Refused Call Configuration
Return Code for Refused Call Configuration
The following table lists the parameters you can use to configure the return code for the refused call.
Parameter features.normal_refuse_code <y0000000000xx>.cfg
Description
It configures a return code and reason of SIP response messages when the IP phone rejects an incoming
call. A specific reason is displayed on the caller’s phone screen.
Permitted
Values
404 -Not Found
480 -Temporarily Unavailable
486 -Busy Here, the caller’s phone screen will display the message “Busy Here” when the callee rejects the
incoming call.
603 -Decline
Default 486
Web UI Features->General Information->Return Code When Refuse
Hide Feature Access Codes
Hide Feature Access Codes feature enables the IP phone to display the feature name instead of the dialed feature
access code automatically. For example, the dialed call park code will be replaced by the identifier “Call Park” when
you park an active call.
The hide feature access codes feature is applicable to the following features:
l
Voice Mail
l
Pick up